Citizen BD2-2880 Command Reference Manual page 27

ESC n1 n2
\
[Function] Specifying the Relative Positions
<1B>H<5C>H<n1>< n2>
[Code]
{0 =< n1 =< FF}
[Range]
{0 =< n2 =< FF} Data is described in Hex code.
[Outline] The printing start position is specified in the number of dots(1/203 inch unit) from
the current position.
• Rightward direction is taken as plus and leftward direction as minus.
• To specify N dot in minus (left) direction, use a complement of N for assignment.
–
N dots = 65536
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
• Specifying exceeding the top of line or the end of line is ignored.
[Caution]
• The initial value is not specified.
[Default]
ESC $
[See Also]
[Sample Program]
See Sample Program and Print Results for ESC $ on Page 44.
–
N
[Print Results]
25
BD2-3880/3890 Command Reference