Notes
•
The above procedures can be used to send or receive all data in specific
modes only. You cannot send or receive individual data items.
•
Data communication can be interrupted at any time by pressing Esc.
This causes the message Stopped! to appear on the displays of both
units.
•
The message Communication error! appears on the displays of both
units whenever data communication is interrupted due to cable
disconnection, line noise, or other abnormal condition.
•
If the secret memory area is accessed on a unit receiving data, the received
data is stored in the secret memory area, regardless of the memory area
the data is in on the sending unit.
•
When you exchange data between the PV-750Plus and another model
PV Unit, the Phone Book (Phone) category corresponds to the Untitled
4 category of the other PV Unit, while the Phone Book (SIM) category
corresponds to the Untitled 5 category of the other PV Unit. The Free 2
fields of the Untitled 4 and Untitled 5 categories correspond respectively
to the Mobile fields of the Phone Book (Phone) and Phone Book (SIM)
categories of PV-750Plus Unit data. If a Free 2 field does not contain
any data, blank spaces are input into the corresponding Mobile field
when data is sent to the PV-750Plus Unit from another model PV Unit.
•
Transferring data from the PV-750Plus to a PV-100 or PV-200 causes
all euro symbols to be replaced by spaces.
The size of the PV-750Plus screen is 160 × 160 dots. Transferring
•
PV-750Plus Quick-Memo data to a PV-100 or PV-200, which both have
98(V) × 124(H)-dot screens, causes the right side and bottom part of the
Quick-Memo image to be cut off in order to fit the PV-100/PV-200 screen.
Chapter 11 Data Communication
139