Specifications; Audio; Video; Fm Tuner - Rotel RSX-1560 Owner's Manual

Surround sound receiver
Hide thumbs Also See for RSX-1560:
Table of Contents

Advertisement

English
English
Specifications

Audio

Continuous Amplifier Power (seven channels driven)
100 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power
200 watts (1kHz, <1.0% THD, 4 ohms, DIN)
Total Harmonic Distortion
<0.05%
Intermodulation Distortion (60Hz:7kHz)
<0.05%
Frequency Response (preamp output)
10Hz – 120kHz, ±3dB (analog bypass)
10Hz – 95kHz, ±3dB (digital input)
Signal to Noise Ratio (IHF A-weighted)
95dB (analog bypass)
92dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance
Line Level: 200 mV/100k ohms
Preamp Output Level/Output Impedance
1.0 V / 1k ohms
Contour (LF/HF)
±6dB at 50Hz/15kHz
Decodable Digital Input Signals
Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, DTS-ES 96/24,
LPCM (up to 192k). Lossless audio formats (using HDMI Version 1.3):
Dolby TrueHD and DTS-HD Master Audio

Video

Input Resolutions
480i/576i, 480p/576p, 720p, 1080i
1080p (HDMI only)
Output Resolutions
480i/576i (Composite, S-Video only), 480p/576p, 720p, 1080i
1080p (HDMI only)
Signal to Noise Ratio
45dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level
1.0 volt
HDMI Inputs/Output
Version 1.3, supporting Deep Color passthrough and Broad Color Space
passthrough
RSX-1560 English v2.indd 53

FM Tuner

Usable Sensitivity
14.2dBf
Signal to Noise Ratio (at 65dBf)
70dB
Harmonic Distortion (at 65dBf)
0.03%
Stereo Separation (1 kHz)
45dB
Output level
1V
Antenna Input (unbalanced)
75 ohms

AM Tuner

Sensitivity
500µV/m
Signal to Noise Ratio
40dB
Output level
500 mV
Antenna Input
Loop Antenna

General

Power Consumption
500 watts
79 watts (idle)
3 watts (standby)
Power Requirements (AC)
120 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
Weight
15.5kg
Dimensions (W x H x D)
431 x 188 x 422mm
Front Panel Height (feet removed/for rack mount)
4U
When sizing openings in custom cabinets, measure the unit to be installed and/or allow at
least 1mm clearance on all sides for unit to unit tolerances. All specifications are accurate
at the time of printing. Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
53
53
29/9/08 15:16:22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents