Table of Contents
Advertisement
Programmable functions
The programmable functions enable
the user to introduce further features as
required. The programmable functions
remain stored in memory until they are
cancelled by the user.
The following programmable
functions can be selected:
P1 = Water level
The water level for rinsing is automati-
cally raised to the maximum level
where rinse results are particularly
important.
Effective for the rinses in programmes:
– COTTONS
– MINIMUM IRON
– QUICK WASH
– MIXED WASH - Poly/Cottons
P2 = Water plus system
The "Water plus" button offers four op-
tions, increasing water level and / or
bringing in an extra rinse cycle.
Option 1
Increase in the rinse water level in the
Cottons, Minimum iron, Quick Wash
and Mixed wash - Poly/Cottons pro-
grammes, where for example rinse re-
sults are particularly important.
Programmable functions
Option 2
Increase in the water level in soak, pre-
wash, main wash and rinses for Cot-
tons, Minimum iron, Delicates, Quick
wash, and Mixed wash particularly for
fabrics that need special care, or
where extra attention must be given to
dissolving detergent. This option is al-
ready set when the machine is de-
livered from the factory.
Option 3
An extra rinse cycle is introduced to
the Cottons programme, e.g. when
rinse results are particularly important.
Option 4
Is Option 2 plus Option 3, where this
quality of rinse is required.
P4 = Activating the i com-
partment
For the first 10 seconds of the main
wash cycle, water flows in through
compartment i.
Compartment j may sometimes not
be able to hold the total amount of
detergent required:
– when the water is very hard (over
3.8 mmol/l, water hardness level IV)
and
– the washing is heavily soiled.
In this case compartment i can be
used to flush in the extra detergent for
the main wash.
31
Hide quick links:
Advertisement
Table of Contents
