Maintenance And Care - Electrolux U31180 EFC 9670-6670 User Manual

Electrolux cooker hood user manual
Table of Contents

Advertisement

Available languages

Available languages

14
14
14
14
14
electr
electr
electr
electr
electrolux
olux
olux
olux
olux maintenance and care

Maintenance and Care

GB
• • • • • Befor
Befor
Befor
Before performing any maintenance operation, isolate the hood fr
Befor
e performing any maintenance operation, isolate the hood fr
e performing any maintenance operation, isolate the hood fr
e performing any maintenance operation, isolate the hood fr
e performing any maintenance operation, isolate the hood from the
electrical supply by switching of
electrical supply by switching of
electrical supply by switching off at the connector and r
electrical supply by switching of
electrical supply by switching of
connector fuse.
connector fuse.
connector fuse.
connector fuse.
connector fuse.
Or if the appliance has been connected thr
Or if the appliance has been connected thr
Or if the appliance has been connected through a plug and socket, then the
Or if the appliance has been connected thr
Or if the appliance has been connected thr
plug must be r
plug must be r
plug must be removed fr
plug must be r
plug must be r
Air suction panels
Air suction panels
Air suction panels
Air suction panels
Air suction panels
EFC 9673 only
EFC 9673 only
EFC 9673 only
EFC 9673 only
EFC 9673 only
Remove the perimeter air suction
panels to access the grease filters.
The perimeter air suction panels are
attached to the cooker hood by a
pins
pins
series of pins
pins
pins and coupling springs
pull them outwards and detach them
from the fastening cable
fastening cable.
fastening cable
fastening cable
fastening cable
Clean the perimeter air suction panels
as often as the grease filters (for more
information about gentle cleaning
methods, read the paragraph
"Cleaning" in the pages that follow).
When refitting the perimeter air suction
panels, ALWAYS reattach the fastening
cables.
Make sure the panels are attached to
the cooker hood properly (snap-
fastened).
f at the connector and r
f at the connector and r
f at the connector and removing the
f at the connector and r
emoved fr
emoved fr
om the socket.
om the socket.
emoved fr
emoved from the socket.
om the socket.
om the socket.
coupling springs
coupling springs
coupling springs;
coupling springs
emoving the
emoving the
emoving the
emoving the
ough a plug and socket, then the
ough a plug and socket, then the
ough a plug and socket, then the
ough a plug and socket, then the
om the
om the
om the
om the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents