Page 3
Dear Customer, If you follow the recommendations contained in this Instruction Manual, your appliance will give you constant high performance and will remain efficient for many years to come. CONTENTS RECOMMENDATIONS AND SUGGESTIONS CHARACTERISTICS INSTALLATION MAINTENANCE...
RECOMMENDATIONS AND SUGGESTIONS INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
INSTALLATION Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob. 7.2.1 7.2.1 •...
Mounting the hood body • Before attaching the hood body, tighten the two Vr Vr screws Vr Vr located on the hood body mounting points. • Hook the hood body onto the screws 12a • Fully tighten support screws 12a •...
Flue assembly Upper exhaust flue Upper exhaust flue Upper exhaust flue Upper exhaust flue Upper exhaust flue • Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1 7.2.1 7.2.1 7.2.1 7.2.1, making sure that they are well seated. •...
MAINTENANCE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time.
Page 12
This appliance complies with European regulations on low voltages, EEC Directive 73/23 on electrical safety, and with the following European regulations: EEC Directive 89/336 on electromagnetic compatibility and EEC Directive 93/68 on EC marking. 436002081_01 - 040202...