Specifying The Angle Unit And Display Format - Casio ALGEBRA FX 2.0 Manual

2-3 Specifying the Angle Unit and Display
Format
Before performing a calculation for the first time, you should use the SET UP screen to
specify the angle unit and display format.
k k k k k Setting the Angle Unit
1. On the Set Up screen, highlight "Angle".
2. Press the function key for the angle unit you want to specify, then press i.
• {Deg}/{Rad}/{Gra} ... {degrees}/{radians}{grads}
• The relationship between degrees, grads, and radians is shown below.
k k k k k Setting the Display Format
1. On the Set Up screen, highlight "Display".
2. Press the function key for the item you want to set, then press i.
• {Fix}/{Sci}/{Norm}/{Eng} ... {fixed number of decimal places specification}/
{number of significant digits specification}/{normal display}/{Engineering Mode}
u To specify the number of decimal places (Fix)
○ ○ ○ ○ ○
Example To specify two decimal places
1(Fix) cw
Press the function key that corresponds to the
number of decimal places you want to specify
( n = 0 to 9).
# Displayed values are rounded off to the
number of decimal places you specify.

Specifying the Angle Unit and Display Format

360° = 2π radians = 400 grads
90° = π/2 radians = 100 grads
2-3-1
19990401
[SET UP]- [Angle]
[SET UP]- [Display]