Automatic Oven Cooking - Caple MULTIFUNCTION OVENS Instructions For Use Manual

Multi-function ovens
Table of Contents

Advertisement

AUTOMATIC OVEN COOKING

To cook food automatically in the oven,
it is necessary to:
1. Set the length of the cooking time
2. Set the end of the cooking time
3. Set the temperature and the oven
cooking program.
These operations are done in the follow-
ing way:
1. Set the length of the cooking time by
pushing the
button to advance, or
if you have passed the desired time
(fig. 3.5). The AUTO and the
bol will be on.
2. Set the end of the cooking time by
pressing the
time already added to the clock time
will appear), and the
2.6); if you pass the desired time you
may get back by pushing the
ton.
After this setting, the
go off. If after this setting, the AUTO
flash on the panel and a buzzer gives
off, it means there was an error in the
programming, that is that the cooking
cycle has been superimposed on the
clock. In this case, modify the end of
cooking time or the cooking time itself
by following again the above men-
tioned instructions.
P
A
U
T
O
Fig. 3.5
button and the
to go back
sym-
button (the cooking
button (fig.
but-
symbol will
3. Set the temperature and the cooking
program by using the switch and ther-
mostat knobs of the oven (see specific
chapters).
Now the oven is programmed and every-
thing will work automatically, that is the
oven will turn on at the right moment to
end the cooking at the established hour.
During cooking, the
on.
By pushing the
the time that remains until the end of
cooking.
The cooking program may be can-
celled in any moment by pushing
At the end of the cooking time the oven
will turn off automatically, the
will turn off, AUTO will flash and a buz-
zer will be released, which can be
turned off by pushing any of the bot-
tons.
Turn the switch and thermostat knobs to
zero and put the programmer onto "man-
ual" by pressing the
Attention: An energy blackout makes
the clock go to zero and cancels the set
programs.
After a blackout, three zeros will flash
on the panel.
P
A
U
T
O
Fig. 3.6
symbol remains
button you can see
symbol
button.
.
13

Advertisement

Table of Contents
loading

Table of Contents