Table of Contents
Advertisement
ELECTRONIC CLOCK
The programmer is equipped with an
electronic clock with lighted numbers
which indicates hours and minutes.
Upon immediate connection of the oven
or after a blackout, three zeros will flash
on the programmer panel.
To set the hour it is necessary to push
the
button and then the
button until you have set the exact hour
(fig. 3.2).
In another way push simultaneously the
two buttons and at the same time
push the
or
Nota: The hour setting delete any pro-
gram.
NORMAL COOKING WITHOUT THE
USE OF THE PROGRAMMER
To manually use the oven, that is, without
the aid of the programmer, it is necessary
to cancel the flashing AUTO by pushing
the button
(AUTO will be switched off
and the symbol
Attention: If the AUTO is steady lighted
(which means a cooking program has
already been inserted), by pushing the but-
ton
you have the cancellation of the
program and the switching to manual.
If the oven is switch on, you must
switch off manually.
Fig. 3.3
12
(fig. 3.2)
or
button.
will go on - Fig. 3.3).
ELECTRONIC TIMER
The timer program consists only of a
buzzer which may be set for a maximum
period of 23 hours and 59 minutes.
If the AUTO flashing push the
ton.
To set the time, push the
the
or
until you obtain the desired
time in the panel (fig. 3.4).
Having finished the setting, the clock
hour will appear on the panel and the
symbol will be lighted.
The countdown will start immediately and
may be seen at any moment on the panel
by simply pressing the button
At the end of the time, the
will be switched off and an intermittent
buzzer will go off; this can be stopped
by pressing one of any of the buttons.
SETTING THE FREQUENCY OF THE
AUDIBLE SIGNAL
The selection from 3 possibilities of
sound can be made by pressing the
button.
A
U
T
O
Fig. 3.4
but-
button and
.
symbol
Advertisement
Table of Contents
