INSTALLATION Declaration of conformity. The parts of this appliance designed to come into contact with foodstuffs comply with the prescriptions of EEC directive 89/109, assimilated by Legislative Decree n° 108 of 25/01/92 Appliance compliant with European Directives 89/336/EEC, 73/23/EEC and subse quent modifications.
Page 5
- adapters, multiple sockets and extension cables should not be used. - in case of faults and/or malfunctions, switch off the appliance; do not attempt to repair it yourself. If the cable is damaged, replace it immediately as follows: - open the terminal board cover, remove the power cable and replace it with one of a relative length with rubber insulation (HO5RRF) and sufficiently large for the rated power of the appliance.
Page 14
IMPORTANT To ensure the built-in appliance works correctly, the unit must correspond to certain characte- ristics. The panels of the units near the oven must be made of heat-resistant material. Especially as regards veneered wooden furniture, the glues must withstand temperatures of up to 120°C: plastic or binders that cannot withstand this temperature will deform or come unstuck.