System Settings Page - Canon VB150 User Manual

System Settings Page

Use this page to set the administrator ID and password as well as the date and time.
Others
"Device Name"
Sets the device name. The device name is used as the
subject in log mail (→ P.58), as a message body
parameter specification in picture mail (→ P.49) and is
used in MV 2.1 (→ MV Manual P.23). The device name
can consist of up to 31 alphanumeric characters and can
include underscores and hyphens.
Example: If "Tokyo-showroom" is set as the device name
and log mail is set, the log mail will be sent with the
following subject line:
Subject: Syslog message from Tokyo-showroom
If no device name is specified, "VB150" is used.
c
Note
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
37
● For reasons of system security, we recommend that you change the
administrator ID and password at regular intervals. It is also a good idea to
change the URL of the settings page. However, be sure to make a note of
the new settings (→ P.114, 115) so that you do not forget them.
● If you have forgotten the Administrator ID or password, press the Factory
Defaults Reset switch to return these settings to their factory default values
(→ P.112). However, note that all settings are returned to the factory default
settings.
Administration Account
"Administrator ID"
Sets the ID used by the administrator. Up
to 15 characters can be set consisting of
alphanumeric characters, underscores
and hyphens. The default setting is "root".
"Password"
Sets the password. Up to 15 ASCII
characters can be used (spaces or printable
characters). The default setting is "VB150".
"Confirm password"
Confirms the password in the field above.
Settings Web page URL
Sets the "path" component for the settings
title page (→ P.35). This URL is used
subsequently when you access the settings
title page after restarting the system. (Up to
31 characters can be set consisting of
alphanumeric characters, underscores and
hyphens.).
The default setting is "admin".
Date and Time
"Time difference with Greenwich Mean Time"
The factory default time difference setting is
set to +9 hours from Greenwich Mean Time.
Please change this setting as needed.
You can only change the date and time on the
VB150 when the "Set the clock to the following
time" option is ticked. Because this setting is
returned to the VB150 when the "Send Config.
and Reboot VB150" button is clicked, the values
for the settings from year to second must be
matched to the time when the button is clicked.