Step 7: Viewer Settings - Canon C50FSi - VB Network Camera Setup Manual

Step 7: Viewer Settings

The following example shows how to configure the basic settings for viewer, create a layout, and display video.
Basic Viewer Settings
You can configure basic viewer settings, such as the maximum frame rate, audio, still images, etc.
In the following example, just check the maximum frame rate setting for live video, but not change the value.
1. Click the [Viewer Settings] tab in the [Configuration and Preferences] screen.
The default value of the maximum frame rate is "5 fps". You can select from the following frame rates.
0.1, 0.2, 0.5, 1, 2, 5, 10, 15, 20, 25, 30
Creating Layouts and Displaying Video
The final step in the system configuration process is to create layouts.
In the following example,
Use grids to arrange video windows
1. Select [View] [Viewing Screen] from the menu.
The Viewer is displayed. Video thumbnails of cameras registered in "Step 5: Camera Server Registration"
are displayed in the camera selection area at the top of the viewer.
2. Right-click on Viewing Area and select [Layout Grids]
VK-Lite System Installation Example
[Alignment Grid].
2-13