Upgrading The Firmware Remotely - Canon VB150 User Manual

Upgrading the Firmware Remotely

When a new version of the firmware is released, the firmware can be upgraded remotely. To
upgrade remotely, use the "vb150rfu.exe" program on the CD-ROM and the new firmware.
1
2
1 Enter the IP address, user name and password.
3 Specify the firmware file to be transferred to the server.
5 The completion window appears.
c
Note
111
Obtain the new firmware.
Visit the following Web site (URL:http://www.canon.com/webview) for the latest
information on new firmware.
Launch the "vb150rfu.exe" program on the enclosed CD-ROM and
use the procedure below to perform the remote upgrade.
● Do not turn the VB150 off until the completion window appears. Turning the
VB150 off before the completion window appears may prevent the VB150
from starting up properly.
● When upgrading from Ver. 1.0 to Ver. 1.1, please follow the instructions as
specified on the following Canon website:
http://www.canon.com/webview
● Server Address: Camera server IP address (→ P.38)
● HTTP Port : The HTTP port No. of the camera server (→ P.57)
● Administrator Name: Server administrator user name (→ P.37)
● Administrator Password: Server administrator password (→ P.37)
2 The current version is displayed.
4 Store the transferred firmware in
flash ROM.