Technical Specifications; Analog - RME Audio Hammerfall HDSPe AIO User Manual

29. Technical Specifications

29.1 Analog

AD – Line In
• Resolution AD: 24 Bit
• Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA @ 44.1 kHz
• THD @ -3 dBFS: -101 dB, < 0.001 %
• THD+N @ -3 dBFS: -99 dB, < 0.0015 %
• Crosstalk: 108 dB
• Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 21.5 kHz
• Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz
• Frequency response AD @ 192 kHz, -1 dB: 5 Hz - 74 kHz
• Input Line: phono unbalanced, optional XLR balanced
• Input impedance: 10 kOhm
• Input sensitivity: Lo Gain, +4 dBu, -10 dBV
• Input level for 0 dBFS @ Lo Gain: +19 dBu
• Input level for 0 dBFS @ +4 dBu: +13 dBu
• Input level for 0 dBFS @ -10 dBV: +2 dBV
DA – Line Out
• Resolution DA: 24 Bit
• Signal to Noise ratio (SNR): 116 dB RMS unweighted, 119 dBA @ 44.1 kHz (unmuted)
• THD: < - 104 dB, < 0.00063 %
• THD+N: < -100 dB, < 0.001 %
• Crosstalk: > 110 dB
• Maximum output level: +19 dBu
• Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 22 kHz
• Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 34 kHz
• Frequency response @ 192 kHz, -1 dB: 5 Hz – 50 kHz
• Output Line: phono unbalanced, optional XLR balanced
• Output impedance: 50 Ohm
• Output level: Hi Gain, +4 dBu, -10 dBV
• Output level at 0 dBFS @ Hi Gain: +19 dBu
• Output level at 0 dBFS @ +4 dBu: +13 dBu
• Output level at 0 dBFS @ -10 dBV: +2 dBV
DA - Phones Output
As Line out, but
• Output: Standard 6.3 mm / 1/4" TRS jack
• Output impedance: 30 Ohm
User's Guide HDSPe AIO © RME
71