Technical Specifications; Digital; Digital Connections; Transfer Modes: Resolution/Bits Per Sample - RME Audio Hammerfall DIGI 9636 User Manual

5. Technical Specifications

5.1 Digital

Ultra-low jitter S/PDIF: < 1 ns in PLL mode (44.1 kHz, optical in)
Ultra-low jitter ADAT: < 2 ns in PLL mode (44.1 kHz, optical in)
Input PLL ensures zero dropout, even at more than 40 ns jitter
Bitclock PLL for trouble-free varispeed operation in ADAT mode
High-sensitivity input stage (< 0.2 Vss input level)
Output voltage 0.8V (consumer mode, phono) or 2.3V (professional mode)
Sample frequencies: 32 / 44.1 / 48 / 88.2 / 96 kHz and variable (wordclock) supported
5.2 Digital Interface
Phono input and output ground-free transformer coupled
Connectors: optical (TOSLINK), phono, internal (CD-ROM/Sync in, Sync out)
Clocks: ADAT Sync In, word clock I/O
Formats: SPDIF (Consumer and Professional), ADAT optical
5.3 Transfer Modes: Resolution / Bits per Sample
ASIO:
24 or 32 bit, 4 byte (stereo 8 byte)
This format is compatible with 16-bit and 20-bit. Resolutions below 24-bit are handled by the
audio application. The card works internally with 32-bit data, but audio data transfer is limited to
24-bits. As no additional Channel Status bits are transferred RME's TMS (Track Marker
Support) is not available. Furthermore, DIGICheck's Channel Status Display is deactivated.
MME:
16 bit, 2 byte
20 bit, 3 byte MSB (stereo 6 byte)
20 bit, 4 byte MSB (stereo 8 byte)
24 bit, 3 byte
24 bit, 4 byte MSB (stereo 8 byte)
32 bit, 4 byte
Channel Interleave operation is not supported. As no additional Channel Status bits are
transferred RME's TMS (Track Marker Support) is not available. Furthermore, DIGICheck's
Channel Status Display is deactivated.
(stereo 4 byte)
(stereo 6 byte)
(stereo 8 byte)
User's Guide DIGI9636 © RME
4