Improving Copy Quality; Sorting Copies Using The Adf; Changing Text Copy Resolution - Brother MFC-8480DN User Manual

Chapter 12

Improving copy quality

You can choose from a range of quality
settings. The default setting is Auto.
Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
Text
Suitable for documents containing only
text.
Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the steps below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Contrast/Quality. Press a or b to
choose Quality.
Press OK.
e
Press d or c to choose Auto, Text or
Photo.
Press OK.
f
Press Start.
To change the default setting, follow the
steps below:
a
Press Menu, 3, 1.
31.Quality
Text
a
Photo
Auto
b
Select ab or OK
b
Press a or b to choose the copy quality.
Press OK.
c
Press Stop/Exit.
86

Sorting copies using the ADF

12
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a
Make sure you are in Copy mode
b
Load your document in the ADF.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Sort.
e
Press Start.
Changing text copy
resolution
.
You can change the text copy resolution to
1200x600 dpi if you are using the scanner
glass and have selected Text as the
Contrast/Quality and an enlargement or
reduction ratio of 100%. The default setting is
600 dpi.
a
Make sure you are in Copy mode
b
Place your document on the scanner
glass.
c
Press Menu, 3, 2.
32.FB Txt Quality
1200x600 dpi
a
b 600dpi
Select ab or OK
d
Press a or b to choose the text copy
resolution.
Press OK.
e
Press Stop/Exit.
12
.
12
.