Care And Maintenance; About The Maintenance Message; Cleaning The Lcd Screen; Cleaning The Machine Casing - Brother 882-S85 Operation Manual

CARE AND MAINTENANCE

CARE AND MAINTENANCE

• Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result.

About the Maintenance Message

Once this message appears, it is recommended to
take your machine to an authorized retailer for a
regular maintenance check. Although this message
will disappear and the machine will continue to
function once you press
display several more times until the appropriate
maintenance is performed.
Please take the time to arrange the maintenance
your machine requires once this message appears.
Such steps will help to ensure you receive
continued, uninterrupted hours of machine
operation for the future.

Cleaning the LCD Screen

If the screen is dirty, gently wipe it with a soft, dry
cloth. Do not use organic solvents or detergents.

Cleaning the Machine Casing

If the surface of the machine is dirty, lightly soak a
cloth in a neutral detergent, squeeze it out firmly,
and then wipe the surface. Then wipe again with a
dry cloth.

Cleaning the Race

If dust or bits of dirt collect in the race or bobbin
case, the machine will not run well, and the
bobbin thread detection function may not operate.
Keep the machine clean for best results.
236
CAUTION
a
b
c
d
e
, the message will
f
g
Press the "Needle Position" button to raise
the needle.
Turn the main power to OFF.
Remove the needle and the presser foot
holder (see pages 38 through 39).
Remove the flat bed attachment or the
embroidery unit if either is attached.
Grasp both sides of the needle plate cover,
and then slide it toward you.
a Needle plate cover
→ The needle plate cover is removed.
Grasp the bobbin case, and then pull it out.
a
a Bobbin case
Use the cleaning brush or a vacuum cleaner
to remove any lint and dust from the race
and its surrounding area.
* Do not apply oil to the bobbin case.
b
a Cleaning brush
b Race
a
a