When Sewing Straight Stitches While Using The Side Cutter - Brother 882-S85 Operation Manual

SEWING THE STITCHES
■ When Sewing Straight Stitches
While Using the Side Cutter
The seam margin should be approximately 5 mm
(approx. 3/16 inch).
a
a Seam margin
Memo
• The fabric will not be cut if the whole fabric is
simply spread out underneath the presser
foot guide plate. Set the fabric as explained
f
in step
then start sewing.
• One layer of 13 oz. denim can be cut.
• Clean the side cutter after use to avoid hav-
ing dust and scraps of thread build up on it.
• Add a small amount of oil as required to the
cutting edge of the cutter.
78
from the previous section, and