How To Set A New Default For The Duplex Scan Mode; (For Scan To E-Mail (E-Mail Server) Only); Maximum Adf Output Tray Capacity (Dcp-8070D, Mfc-8370Dn And Mfc-8380Dn) - Brother DCP-8070D Software User's Manual

How to set a new default for the Duplex Scan mode

(For Scan to E-mail (E-mail server) only)

You can set your own default setting for the Duplex Scan mode. You can choose from two types of layout,
long edge or short edge.
a
Press Menu, 1.
b
Press a or b to choose Document Scan. Press OK.
c
Press a or b to choose Duplex Scan. Press OK.
d
Press a or b to choose Long edge or Short edge. Press OK.
e
Press Stop/Exit.
Maximum ADF output tray capacity
(DCP-8070D, MFC-8370DN and MFC-8380DN)
If the maximum capacity of the output tray is reached during use, the machine will stop scanning and the LCD
will show 20 Sheet Limit.
Do one of the following:
To send the pages scanned so far to a server, press 1.Send.
To delete the scanned pages, press 2.Delete.
If you send the pages already scanned and want to send the remaining pages to a server, remove the
scanned sheets from the ADF output tray and press Start.
Network Scanning (For models with built-in network)
4
4
4
101