Controlcenter2; Using Controlcenter2; Turning The Autoload Feature Off - Brother DCP-8070D Software User's Manual

10

ControlCenter2

Note
• The features available to you in ControlCenter2 may vary depending on the model number of your
machine.
• Duplex Scan is not supported by the DCP-8070D, MFC-8370DN and MFC-8480DN.
• If the LCD shows error messages during scanning, see Troubleshooting in the User's Guide or Error and
maintenance messages in the User's Guide.

Using ControlCenter2

ControlCenter2 is a software utility that lets you quickly and easily access your often used applications. Using
ControlCenter2 eliminates the need to manually launch specific applications. The icon will appear on the
menu bar. To open the ControlCenter2 window, click the
the following operations:
a
Scan directly to a file, E-mail, word processor or graphics application of your choice. (1)
b
Custom Scan buttons let you configure a button to meet your own application needs. (2)
c
Access the Copy features available via your Macintosh. (3)
d
Access the settings available to configure your device. (4)
e
You can choose which machine ControlCenter2 will connect with from the Model pop-up menu. (5)
You can also open the Device Selector window by choosing Other... from the Model pop-up menu.
f
You can also open the configuration window for each function by clicking the Configuration button. (6)

Turning the AutoLoad feature off

If you do not want ControlCenter2 to run automatically each time you start your Macintosh, do the following.
a
Click the ControlCenter2 icon in the menu bar and choose Preferences.
The ControlCenter2 preference window appears.
b
Uncheck Start ControlCenter on computer startup.
icon and choose Open. ControlCenter2 has
10
10
10
10
181