Handling And Using Special Paper - Brother MFC-7360 Basic User's Manual

Chapter 2
Use paper made for plain paper copying.

 Use paper that is 75 to 90 gsm.
 Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
Handling and using special
paper
The machine is designed to work well with
most types of xerographic and bond paper.
However, some paper variables may have an
effect on print quality or handling reliability.
Always test samples of paper before
purchasing to ensure desirable performance.
Store paper in its original packaging and keep
it sealed. Keep the paper flat and away from
moisture, direct sunlight and heat.
Some important guidelines when selecting
paper are:
 DO NOT use inkjet paper because it may
cause a paper jam or damage your
machine.
 Preprinted paper must use ink that can
withstand the temperature of the
machine's fusing process 392 degrees
Fahrenheit (200 degrees centigrade).
 If you use bond paper, paper having a
rough surface or paper that is wrinkled or
creased, the paper may exhibit degraded
performance.
20
Types of paper to avoid
IMPORTANT
2
Some types of paper may not perform well
or may cause damage to your machine.
DO NOT use paper:
• that is highly textured
• that is extremely smooth or shiny
• that is curled or warped
1
1 A curl of 2 mm or greater may cause
jams to occur.
• that is coated or has a chemical finish
• that is damaged, creased or folded
• that exceeds the recommended weight
specification in this guide
• with tabs and staples
• with letterheads using low temperature
dyes or thermography
• that is multipart or carbonless
• that is designed for inkjet printing
If you use any of the types of paper listed
, they may damage your machine. This
damage is not covered under any Brother
warranty or service agreement.
2
1