Brother MFC-8890DW Quick Setup Manual page 7

Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the protective cap
on the machine.
1
(Example
for Australia)
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the protective cap
from the EXT. jack on the machine.
1
(Example
for Australia)
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 8. For
additional details, see Connecting an
external TAD (telephone answering device)
in Chapter 7 of the User's Guide.
from the EXT. jack
a
1 1
2 2
a
Set your country (for
6
Australia/New Zealand
customer only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by plugging
in the power cord and turn the power switch on.
b
Press or
(Australia or New Zealand).
Set Country
a Australia
b New Zealand
Select ab or OK
Press OK when the LCD shows your country.
c
The LCD prompts you to make sure of the
country again.
Set Country
Australia
1.Yes
2.No
Enter Number
d
If the LCD shows the correct country, press 1
to go to Step e.
—OR—
Press 2 to go back to Step b to choose the
country again.
e
After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 6.)
to choose the country
7