Part 2: Troubleshooting
3.3.7 Installing the logic board cover
If the logic board cover is installed incorrectly, the logic board and paper feed rollers
will be obstructed and the ASF motor may go out of sync.
Note that prong A is prone to engage incorrectly. Make sure that it fits in correctly.
A
3.3.8 Handling the purge unit
Note the following with regard to the purge unit:
(1) Grease soiling the blade
Due to the blade's height, the carriage guide shaft may touch it when the shaft is
removed or installed. Grease may soil the blade as a result.
You must not allow any grease or oily substance to adhere to the blade.
Figure 2-7 Installing the Logic Board Cover
Figure 2-8 Handling the Purge Unit
2-18
Blade
S6300