Printing Envelopes - Canon Satera LBP-5600 User Manual

Printing Envelopes

Envelopes can be loaded in the multi-purpose tray. Use the following procedure to
load envelopes in the multi-purpose tray.
IMPORTANT
•
The printable envelope types are shown below:
- LBP5900
(Envelope Y401 for Canon LBP
- LBP5600
110.0 mm x 220.0 mm
Envelope COM10
105.0 mm x 241.0 mm
* You cannot use envelopes at sizes of DL, COM10, Monarch, and C5 that have a flap
on the short edge.
•
Do not use the envelopes with adhesive on the surface. This may result in poor print
quality or damage to the printer.
•
When printing envelopes, data cannot be printed within a 10mm margin on all sides of
the envelopes. (If you have selected the [Print with Upper Left of Sheet as Starting Point]
check box in the [Finishing Details] dialog box in the printer driver, however, you can
extend the printable area to near the edges of the paper. For more details, see Online
Help in the printer driver.)
•
Printing speed drops when printing envelopes.
NOTE
When printing envelopes, they may be creased.
70
YOUGATA No.4
(105 mm x 235 mm)
/recommended)
*Envelopes of YOUGATA No.4 and YOUGATA No.2
with a flap on the short edge cannot be used.
Envelope DL
YOUGATA No.2
(114 mm x 162 mm)
(Envelope Y201 for Canon LBP/
recommended)
Envelope Monarch
98.0 mm x 191.0 mm
Envelope C5
162.0 mm x 229.0 mm
KAKUGATA No.2
(240 mm x 332 mm)
Envelope B5
176.0 mm x 250.0 mm