Canon Satera LBP-5600 User Manual page 23

NOTE
When printing envelopes, they may be creased.
I Envelope of LBP5600
The envelopes that can be used with this printer are Envelope DL, Envelope COM10,
Envelope C5, Envelope Monarch, and Envelope B5, and the one that have the following
structures only. Load the stack of envelopes with the address side (non-glued side) facing
down in the multi-purpose tray.
IMPORTANT
•
The printable envelope types are shown below:
Envelope DL
110.0 mm x 220.0 mm
Envelope COM10
105.0 mm x 241.0 mm
* You cannot use envelopes at sizes of DL, COM10, Monarch, and C5 that have a flap
on the short edge.
•
Do not use the following types of envelopes. Using inappropriate envelopes may result in
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
•
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
and press the fold lines along the edges tight.
•
Do not print on the reverse side (glued side) of envelopes.
22
Envelope Monarch
98.0 mm x 191.0 mm
Envelope C5
162.0 mm x 229.0 mm
Envelope B5
176.0 mm x 250.0 mm