Canon Satera LBP-5600 User Manual page 63

IMPORTANT
•
•
•
•
•
62
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
When loading long size paper, set one piece at a time to the multi-purpose tray as
shown in the figure.
The multi-purpose tray can be loaded with up to the number of sheets listed below.
Make sure that the paper stack does not exceed the load limit marks.
- Plain paper: Approx. 100 sheets (When plain paper that weighs 64 g/m
- Heavy paper: Approx. 50 sheets (When heavy paper that weighs 128 g/m
used)
- Coated Paper: Approx. 50 sheets
- Label: Approx. 40 sheets
Load the paper so that it is straight.
If the rear edge of the paper stack is not properly aligned, it may result in misfeeds
or paper jams.
If the paper is curled or folded at corners, flatten it before loading it in the printer.
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
once. In this case, align the edges of the stack on a hard, flat surface.
2
is used)
2
is