Aligning the Print Head
After the BJ cartridge is exchanged, align the print head position of the BJ cartridge as explained
below.
1
Confirm that the printer is turned on and place two sheets of A4 plain paper in
the auto sheet feeder.
2
Open the printer driver setting screen.
Open the Page Setup dialogue box.
Click the Utilities button and open the printer utility
dialogue box.
3
Select Print Head Alignment.
Select Test Print.
Click Print Head Alignment.
4
Read the message displayed on the screen
and then click OK.
5
The pattern shown on the right is printed out.
Routine Maintenance
57