Canon BJC-3000 User Manual page 33

3
Remove the new ink tank from its package. Pull
the orange tape up and against the perforations
to open the packing film.
Remove the film carefully so you do not
remove the label from the ink tank. The
label is needed to match the ink tank with
the correct slot of the BJ Cartridge.
4
Grip the bottom of the ink tank as shown in the
figure and twist off the orange protective cap in
the direction of the arrow.
• Never attempt to reattach a protective cap to an ink tank.
Discard the protective cap according to the local laws and
regulations regarding disposal of consumables.
• To avoid interfering with the ink supply from a tank, do not
touch an open ink port on the ink tank.
5
Hold the new ink tank at a slight angle, align it
with the correct slot, then press down gently on
top of the ink tank until it locks in place.
Make sure that you insert the ink tank in the correct slot.
The following figures show the correct array of ink tanks in
the BJ Cartridges.
Standard colour combination
Color BJ Cartridge BC-33
BCI-3BK (Black)
BCI-3C (Cyan)
BCI-3M (Magenta)
BCI-3Y (Yellow)
Replacing the Ink Tanks
Label
Ink Tank
BCI-3BK
Ink Tank Ink Tank Ink Tank
BCI-3C BCI-3M BCI-3Y
Black Cyan Magenta Yellow
31