The Last Part Of Print Job Not Printing - Canon BJC-3000 User Manual

The last part of print job not printing

Cause:
The paper used for printing differs from the paper size specified in the application program and printer driver.
Solution:
- Specify the paper size you are using in the printer driver Page Size setting in the Page Layout tab.
- If your application program allows you to specify the paper size in the page setup, ensure that the Page
Size settings in the software application and the printer driver are the same.
Cause:
Printer cable not connected correctly.
Solution:
Check that the printer cable is securely fastened to the computer and the printer.
For details, refer to the Getting Started manual.
Cause:
Printer cable fault.
Solution:
Try using another printer cable.
For details about the printer cable, contact the hardware manufacturer.
Cause:
Switching device or external buffer fault.
Solution:
Disconnect the switching device or external buffer and print with the printer directly connected to the comput-
er.
If you can then print normally, the fault is probably in the switching device or external buffer. Consult the
hardware manufacturer.
Cause:
USB hub fault.
Solution:
Disconnect the USB hub you are using and then directly connect the printer to the computer. If the printer
can print normally, the USB hub may not be operating properly.
Cause:
Printer is set to ECP mode.
Solution:
Disable ECP mode.
Open the Printer Properties dialogue box. Click on the Maintenance tab and then click on the Custom
Setting button. In the Custom Setting dialogue box, disable "Set printer to ECP mode" (if enabled) and click
on the Send button.
Cause:
WPS (Windows Printing System) driver is installed on the computer.
Solution:
Change the WPS driver port setting to FILE or delete the WPS driver.
To change the port setting, open the WPS Driver Properties window. In the Details tab, select FILE in the
"Print to the follwing port" box.
To delete the WPS driver, select Programs and then Windows Printing System from the Windows Start menu
and click Uninstall. Then follow the on-screen instructions.
72