Error Number (*202) Displayed; Error Number (*203) Displayed; Error Number (*300) Displayed - Canon BJC-3000 User Manual

Error number (*202) displayed

Cause:
Sufficient memory not available for the application program.
Solution:
Refer to the user's manual for your application program and check that the required amount of memory is
allocated to the application program.
If there is not enough memory installed, install more memory. Refer to the user's manual for your computer
for information on installing additional memory.

Error number (*203) displayed

Cause:
Installed printer driver not operating correctly.
Solution:
Load the Setup Software and Reference Guide CD-ROM. When the CD-ROM folder opens, double-click the
BJ Installer icon and then select your printer. Click the Custom Remove tab. Then follow the on-screen
instructions.

Error number (*300) displayed

Cause:
Printer is not on.
Solution:
Check the POWER lamp to see if it is lit green.
If the POWER lamp is flashing, the printer is still warming up. Please wait until the POWER lamp is continu-
ously lit green.
Cause:
Printer cable not connected correctly.
Solution:
Make sure that the printer cable is securely fastened to the computer and the printer.
For details, refer to the Getting Started manual.
Cause:
Printer cable fault.
Solution:
Try using another printer cable.
For details about the printer cable, contact the hardware manufacturer.
Cause:
Switching device or external buffer fault.
Solution:
Disconnect the switching device or external buffer and print with the printer directly connected to the comput-
er.
If you can then print normally, the fault is probably in the switching device or external buffer. Consult the
hardware manufacturer.
Cause:
Chooser may not be selected correctly.
Solution:
Select Chooser from the Apple menu. Click on the BJC-3000 icon and check that BJC-3000 is selected in
Connect to box.
66