Replacing The Tail/Brake Light Bulb - Yamaha TW200Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
6. Install the bulb cover, and then
connect the coupler.
7. Place the headlight unit in the orig-
inal position, and then install the
1 bolts.
2
3
4
5
8. Install the cowling.
9. Have a Yamaha dealer adjust the
6
headlight beam if necessary.
7
8
9
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
1
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
7-34
EAU24133
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
1
[ECA10681]