Replacing A Turn Signal Light; Bulb; Replacing The License Plate Light - Yamaha FZ6RY Owner's Manual

Replacing a turn signal light

bulb

1. Remove the turn signal light lens
by removing the screw.
1
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24204
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the socket (together with
the bulb) by pulling it out.
EAU24312
1
1. License plate light bulb socket
2. License plate light bulb
2
3. Remove the burnt-out bulb by pull-
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6. Install the license plate light unit by
7-38
ing it out.
bulb) by pushing it in.
installing the screws.
1
2
7