Diverse Repeater ~ 4th Edition ~ 25th April '01 ~ 3831
Setting up
Follow the instructions in this section
to set up your Repeater ready for use.
G
In addition to this user guide you
should have the following items:
•
The Repeater unit.
•
A power adaptor.
•
2 screws and wall plugs.
G
The power adaptor has a long lead
with a small plug on the end of it which
has to be plugged into the socket on
the back of the Repeater as shown in
the diagram.
6
G
You should use a free mains socket in
the vicinity of your base unit so that the
Repeater and base unit can be near
each other during registration.
G
The green LED should light up (may
be continuous or flashing) which will
prove power is being supplied to the
Repeater.
. . . . . .
. . . . . .
. . . . .
G