Diverse Repeater ~ 4th Edition ~ 25th April '01 ~ 3831
Registering the BT DECT
Repeater on different base
stations
The procedure to register the Repeater
to a base station will differ depending
on which base station is used. To make
registering easier the Repeater should
be placed near to the base station.
Up to 6 Repeaters can be assigned to a
base station.
When using 2 or more Repeaters on a
base station all registered Repeaters
must be powered up before registering
additional Repeaters.
Before attempting to register the
Repeater to the base station make sure:
•
At least one handset is registered to
the base station.
•
Base station and handset are
powered up and in idle state.
•
Repeater power adaptor is connected
to the Repeater and the mains
socket – but switched OFF at the
wall socket.
8
Press the following buttons:
For an Executive handset
•
Press the
button.
•
Press the
button.
•
Press the
button.
•
Press the
button.
•
Enter the 4-digit PIN code (default
is 0000)
•
Press the
button.
•
Press the
button.
•
Press the
button.
•
Press the
button.
For a Classic handset
•
Press the
button.
•
Press the
button.
•
Press the
button.
•
Enter the 4-digit PIN code (default
is 0000)
•
Press the
button.
•
Press the
button.
•
Press the
button.
•
Press the
button.