Help - BT Diverse Repeater User Manual

Diverse Repeater ~ 4th Edition ~ 25th April '01 ~ 3831

Help

The registration process was not
successful. You will have to repeat the
registration process again with the base
station concerned.
The radio connection is very weak/poor.
You will have to find another location
where the signal from the base is better.
The Repeater may have been reset.
If this is the case it will have to be
registered to the base again.
There is no power to the Repeater.
Check that the Power adaptor lead is
plugged into the Repeater, the power
adaptor is plugged into the mains socket
and the mains power is switched on.
The radio connection is very
weak/poor. You will have to find
another location where the signal from
the base is better.
There is no power to the Repeater. Check
that the Power adaptor lead is plugged
into the Repeater, the power adaptor is
plugged into the mains socket and the
mains power is switched on.
The Repeater is not registered. You will
have to repeat the registration process
again with the base station concerned.
You may be going out of range of the
base/repeater areas, or in a blind spot.
Move towards the base or Repeater.
Some base stations and handset
combinations do not support call
handover during conversation when
moving from base to repeater area.
The Repeater's confidence tone (a beep
every 2 seconds) has been switched on.
To switch the confidence tone off follow
the procedure in this guide.
If you are still experiencing difficulty,
please call the Diverse Helpline on
08457 908070.
17