Download Print this page

BT Accord 30 Installation & User Manual page 3

Telephone amplifier & headset
Hide thumbs Also See for Accord 30:

Advertisement

BT Accord 30 manual pdm
15/6/04
Connections
Connecting to the telephone
Unplug the handset cord from your telephone and plug it into the handset
modular socket (14). Connect the BT Accord 30 to your telephone using the
phone cord provided (this cord has an RJ-11 modular plug on either end). Plug
one end of the cord to your telephone from where you unplugged your handset (A)
and the other end to the telephone base unit modular socket (15) on the back
of the BT Accord 30 (see illustration below).
14
15
Connecting the telephone headset
Insert the telephone headset plug into the RJ-11 modular socket (12) on the
front panel of the BT Accord 30. The headset socket will allow monaural (single
ear) use.
For telephone only use you will not need to connect numbers 3, 4, 9, and 10
on the diagram on page 3.
Congratulations you are now connected!
4
5:38 pm
Page 4
Connecting to the computer
You may use the BT Accord 20 headset supplied or a computer headset if you
already have one. Computer headsets are typically stereo (both ears) and may be
more suitable for some applications (games etc).
To connect the BT Accord 30 to your computer you will need to use the long
cable supplied with two jack plugs at each end. Connect the plugs from one end
of the cable to the sockets (3, 4 on the diagram on page 3) matching the green
and blue colours on socket and plug. Make the same connections to your
computer's sound card.
A
Congratulations you are now connected!
Inserting batteries
The BT Accord 30 requires 2 x "AA" sized batteries (not supplied). To insert
batteries slightly depress the compartment lid and slide outwards. Install batteries
with polarities according to the battery diagram inside the compartment. Close the
lid and turn the power "on" (5). Alkaline batteries are recommended. If you find
that the volume is too low and you cannot adjust it then this is typically an
indication that the batteries need to be replaced.
For computer only use you will not need to connect numbers 12, 14, and 15
on the diagram on page 3.
5

Advertisement

loading