❷ Introduction To The Projector; Congratulations On Your Purchase Of The Projector; Features You'll Enjoy - NEC NP-P401W User Manual

❷ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today. The projector enables you to project precise images
up to 300 inches across (measured diagonally) from your PC or Mac computer (desktop or notebook), VCR, DVD
player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*
* Do not attempt to mount the projector on a ceiling yourself.
1
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.

Features you'll enjoy:

• Quick start (3 seconds*
3 seconds* after turning on the power, the projector is ready to display PC or video images.
2
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when
projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
* The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message.
2
• 0.21 W (100-130 V AC)/0.43 W (200-240 V AC) in standby condition with energy saving technology
Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode
that consumes only 0.21 W (100-130 V AC)/0.43 W (200-240 V AC). The wattage is a typical value.
• Carbon Meter
This feature will show energy-saving effect in terms of CO
projector's [ECO MODE] is set to [AUTO ECO], [NORMAL], or [ECO].
The amount of CO
2
in the INFO of the on-screen menu.
• Lamp life up to 6000 hours*
Using in Eco Mode (ECO) allows you to prolong the projector's lamp life up to 6000 hours (up to 4000 hours in
ECO MODE OFF).
* P501X/PE501X/P451W: 6000 hours (up to 3500 hours in ECO MODE OFF).
3
• Two HDMI inputs supports digital signals
The two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal.
• 16 W built-in speaker for an integrated audio solution
Powerful 16 watt monaural speaker provides volume need for large rooms.
• MIC Input provided
A MIC input jack for a commercially available dynamic microphone is useful for your presentation in a conference
room or lecture in a classroom.
• The supplied remote control allows you to assign a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by assigning
an ID number to each projector.
), Quick Power Off, Direct Power Off
2
emission reduction will be displayed in the confirmation message at the time of power-off and
3
. The remote control can be used wirelessly.
1
emission reduction (kg) and electricity cost when the
2
2
1. Introduction