Regulations, Standards, Guidelines - AEG SANTO 70398-DT Operating Instructions Manual

m m Caution! Do not overtighten the screws (max. 2 Nm) as you may damage
the door handles.
m m Warning:
After having reversed the doors check that all the screws are properly
tightened and that the magnetic seal adheres to the cabinet. If the ambient
temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket or accelerate
this process by heating up the part involved with a normal hairdrier.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in
accordance with the appropriate standards. The necessary measures in
accordance with appliance safety legislation regulations (GSG), accident
prevention regulations for refrigeration appliances (VBG 20) and the regu-
lations of the German Society of Electrical Engineers (VDE) were observed
in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
24