Removing the lower bezel
To remove the lower bezel, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If you are replacing a non-hot-swap component, turn off the server and all
3. Unlock the side cover.
4. Press the round blue release button on the right side of the lower bezel and
5. If you are instructed to return the lower bezel, follow all packaging instructions,
34
Lotus Foundations Appliance, Type 9234 CNU and 9234 DNU: Problem Determination and Service Guide
on page 25.
attached devices; then, disconnect all power cords and external cables.
Note: You do not have to remove the side cover to remove the lower bezel.
rotate the lower bezel downward to disengage and remove it from the chassis.
and use any packaging materials for shipping that are supplied to you.