Connectors and Passwords
3.2 Passwords
3.2.1 Remove a Setup Password
1. Power down the Blade PC.
2. Remove the blade.
3. Install a jumper on the E49 header.
4. Power up the unit. The password is now removed.
3.2.2 Establish a Setup Password
Power down the Blade PC.
1. Remove the blade.
2. Remove the jumper from the E49 header.
3. Power up and Use F10 retup to establish the setup pasword.
3–2
352971-005
Service Reference Guide bc1000 and bc1500