Related Manuals for Outlaw LFM seriea
Summary of Contents for Outlaw LFM seriea
- Page 1 LFM Series Low Frequency Modules LFM-1 Compact and LFM-2 Owner’s Manual Version 1.0...
-
Page 2: Please Read First
AC power source. Many modern electronics products feature automatic The high power output of your Outlaw LFM may require heavy power draw under full load turn-on circuits that may be activated during an installation, causing the potential for conditions. -
Page 3: Table Of Contents
If any of the above is missing from your shipment, please contact Outlaw Audio immediately. The contents of this manual are Copyright © 2007 by Outlaw Audio, LLC, and may not be duplicated or reproduced by any means, whether physical, electronic or otherwise without prior written consent from Outlaw Audio. -
Page 4: Before You Begin
These spikes provide the ground clearance that is required for optimal performance and safety. Failure to use the feet provided will result in damage not covered under the Outlaw Audio Warranty. For your convenience we have provided “dimpled discs“ that may be used when the LFM is placed on surfaces other than carpet, such as wood, tile, certain rugs and linoleum surfaces to prevent damage to the floor or floor covering. -
Page 5: Subwoofers, Bass And Overall System Performance
Subwoofer Preamp Output CROSSOVER Switch When an external crossover such as the Outlaw Audio ICBM is used, use this If a low-level subwoofer output is available, use this jack to connect your LFM switch to bypass the LFM’s internal crossover. - Page 6 FRONT RIGHT CENTER FRONT LEFT MASTER SWITCH CIRCUIT BREAKER 15 AMP OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT Riv Alifi WARNING: 120 VAC/60Hz HAZARDOUS ENERGY. MAKE PROPER SPEAKER 1800W CONNECTIONS: SEE OWNER'S MANUAL BEFORE USING. Right Sk Lft Sk Outlaw Audio...
-
Page 7: Connecting To A System With No Preamp Outputs
Owner’s Manual Subwoofer Placement Subwoofer Placement . Connect one end of the subwoofer cable to the subwoofer or LFE output on the receiver or processor. Placement of your LFM series subwoofer is a critical component in maximizing 4. Locate the connection labeled SUB IN on the rear panel of the subwoofer its performance. The subwoofer’s specific location in a room influences the its and connect the other end of the subwoofer cable to that jack. “perceived” frequency response, sound pressure level (SPL), and overall accuracy. 5. Plug the LFM’s power cord into the input on the LFM Series Subwoofer Since each listening room differs in virtually every aspect, the ideal location will and connect the plug to an un-switched AC outlet. -
Page 8: Setting The Lfm Controls
Y-adapter that is of equal or better quality than the subwoofer cables you 0 Hz Small tower or large bookshelf speaker with one 8-inch or two 6-inch intend to use. (We recommend the Outlaw Audio PCA Y-Adapter.) woofers: 80 Hz... -
Page 9: Care And Maintenance
866-688-5292. rear panel of the subwoofer. This will prevent the automatic turn on circuits from It is important that only a service agent authorized by Outlaw Audio carry out any accidentally powering the system on during your absence. -
Page 10: Model Lfm-1 Compact Specifications
0 to 180 Degrees 112dB 110dB (subject to placement and room gain) (subject to placement and room gain) Dimensions (HxWxD) Dimensions (HxWxD) 16.75” x 13.0” x 19.0” 17” x 11.25” x 16.5” Weight 55 lbs Weight 37 lbs Outlaw Audio... -
Page 11: The Outlaw Audio 0-Day Satisfaction Guarantee
Owner’s Manual In the event that you wish to return your Outlaw LFM back to us, for any • Damage from the performance of repairs by someone not authorized reason, please call to arrange for a Return Authorization Number. This will...
Need help?
Do you have a question about the LFM seriea and is the answer not in the manual?
Questions and answers