Download  Print this page

Outlaw BLS-B(C) Owner's Manual

The outlaw bookshelf loudspeakers
Hide thumbs

Advertisement

The Outlaw
Bookshelf Loudspeakers
BLS-B(C) Black (and Cherry)
Owner's Manual

Advertisement

Table of Contents
loading

  Related Manuals for Outlaw BLS-B(C)

  Summary of Contents for Outlaw BLS-B(C)

  • Page 1 The Outlaw Bookshelf Loudspeakers BLS-B(C) Black (and Cherry) Owner’s Manual...
  • Page 2: Table Of Contents

    The Outlaw Audio 30-Day Satisfaction Guarantee Outlaw Audio Limited Warranty The contents of this manual are Copyright © 2007 by Outlaw Audio, LLC, and may not be duplicated or reproduced by any means, whether physical, electronic or otherwise without prior written consent from Outlaw Audio.
  • Page 3: Unpacking

    2 Black Metal Grills (pre-installed)  Owner’s Manual  If any of the above is missing from your shipment, please contact Outlaw Audio immediately at 866-OUTLAWS. Loudspeaker Controls and Connections Boundary Switch This three-position switch provides a (0dB, 2dB and 4dB) reduction in upper bass frequencies to maintain a linear response for wall or corner loaded speaker placements.
  • Page 4: Option 1: Connecting To A System With Single Speaker Wire

    Connecting to a system with single speaker wire. This is the most common way to connect an individual speaker to a power amplifier or receiver. A standard 16 or 14 gauge speaker wire is used to join the amp and speaker together.
  • Page 5: Option 3: Connecting To A System In A Bi-Amplify Scheme

    Any loose strands that touch both the positive and negative terminal posts must be removed before powering up the amplifier. Failure to do so may result in damage to the amplifier or speaker. Option : Bi-Wired Connection...
  • Page 6: Notes On Speaker Placement

    See diagram. However, room anomalies may require that a speaker be toed further in or out. Toeing a speaker out (adjusting the angle of the speaker outward including straight forward) will widen your soundstage. The opposite will occur when toeing a speaker in.
  • Page 7: Volume Level

    When a sound effect pans from one speaker to the next, you’ll want your speakers’ timbre to match as closely as possible. This will ensure that whatever instrument or sound effect you are hearing sounds the same, regardless of which speaker in your system it is emanating from.
  • Page 8: The Outlaw Audio 30-Day Satisfaction Guarantee

    This will insure that your problem is discussed with a service technician who will determine if there is a quick solution to your problem. Outlaw Audio shall not be liable for, in any way responsible for, any inci- dental or consequential damages of any kind. Some states do not allow...

This manual is also suitable for:

BlsBls-bBls-c