Table of Contents
Advertisement
Chapter 2
2
COPY FUNCTIONS
This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment.
NORMAL COPYING
This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.41), enter your 3-digit account number.
Copying from the document glass
1
Open the document cover/SPF, and
place the original.
An original up to A3 (11" x 17") can be placed
Note
on the document glass.
2
Close the document cover/SPF.
18
Place the original face
down on the document
glass. Align it with the
original size scale.
3
Press the [ORIGINAL SIZE ENTER]
key (
) and select the original size.
ENTER
A3
A4
ENTER
A4
A5
B4
XTRA
● Make sure that the PAPER SIZE indicator lights up.
If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key (
) and copy from the bypass tray.
● The bypass tray must be manually selected.
● To copy on paper of a different size than the original,
select the paper with the [TRAY SELECT] key (
● If the ORIGINAL SIZE indicator is blinking, rotate the
original so that it is in the same orientation as the
blinking ORIGINAL SIZE indicator.
4
Set the number of copies.
5
Press the [START] key (
copying.
• The paper output tray can hold up to 250
Note
sheets of paper.
• About one minute after copying ends, "Auto
clear" activates and restores the copy
settings to the initial settings. (p.12) The
setting for "Auto clear time" can be changed
in the user programs. (p.40)
• Press the [CLEAR] key (
copying in the middle of a run.
When the original size is
selected, the tray with the
same size of paper is
automatically selected.
(When there are two or
more paper trays)
).
) to begin
The copy is delivered to
the paper output tray.
) to stop
Advertisement
Chapters
Table of Contents
