7 ] Installing The Open Button, Cover Lock Lever, Sensor Pcb Assy, And Tape End Sensor Assy To The Body Cover - Brother PT-2500PC Service Manual

[ 7 ] Installing the Open Button, Cover Lock Lever, Sensor PCB ASSY, and Tape End
Sensor ASSY to the Body Cover
(1) Snap the open button into the slot provided in the body cover, then secure the open
button with the screw.
(2) Set the lock lever spring on the cover lock lever and install them on the body cover
so that the square opening becomes fitted over the boss of the open button.
(3) Hook the lock lever spring on the boss provided on the body cover.
(4) Secure the cover lock lever with the screw.
(5) Apply grease (Silicone grease G501) to the square opening of the cover lock lever
and boss of the open button.
Fig. 2.2-33 Installing the Open Button and Cover Lock Lever
II - 31