Preparation; How To Access The Object Component - Brother FAX4100 Service Manual

n n n n

Preparation

Prior to proceeding to the disassembly procedure,
(1) Unplug
- the power cord,
- the modular jack of the telephone line,
- the modular jack of the curled cord (and remove the handset)*,
- the PC interface cable, and
- the modular jack of an external telephone set if connected. (Not shown below.)
(2) Remove
- the document support,
- the document tray,
- the paper cassette, and
- the drum unit (with toner cartridge loaded)
n n n n

How to Access the Object Component

• On the next page is a disassembly order flow which helps you access the object components.
To remove the heat-fixing unit, for example, first find it on the flow and learn its number (
this case). You need to remove parts numbered
the heat-fixing unit.
• Unless otherwise specified, the disassembled parts or components should be reassembled in
the reverse order of removal.
(*For those models equipped with handset.)
, ,
IV - 2
, , , and so as to access
in