Brother FAX100 Service Manual page 60

5) Turn down the left release lever.
6) Slide the left ACS catch towards you while pulling the lock "c" outwards.
In the same way, remove the right ACS catch.
7) Remove the right bushing from the platen ASSY while releasing the two pawls "d."
Then, remove the platen ASSY.
8) Push down the recorder PCB and pull it towards you slightly to release the two tabs
"e" from the cutter chassis, taking care not to lose three springs.
9) Remove the right and left release levers from the release shaft.
Release lever (L)
Cutter chassis
1
Release lever (L)
ACS catch (L)
2
3
"c"
Recorder PCB
Tab "e"
Tab "e"
V – 8
Release shaft
Spring
Pawls "d"
Bushing (R)
Platen ASSY
ACS catch (R)
Release lever (R)