Brother FAX100 Service Manual page 109

Selector
No.
1 Not used.
2 Ringer OFF setting
Automatic playback of OGM at
3
the start time of OGM ON mode
Detection of distinctive ringing
4
pattern
5 Automatic erasion of voice alarm
6 Recording quality level
Sampling rate when the record-
7
ing quality level is set to High
8 Not used.
Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
Selector 3: Automatic playback of OGM at the start time of OGM ON mode (For those models
equipped with a built-in TAD)
This selector determines whether or not the equipment automatically plays back an OGM the
moment it switches to the OGM ON mode in the MC mode.
Selector 4: Detection of distinctive ringing pattern
If this selector is set to "0", the equipment detects only the number of rings; if it is set to "1",
the equipment detects the number of rings and the ringing time length to compare the de-
tected ringing pattern with the registered distinctive one.
Selector 5: Automatic erasion of voice alarm
This selector determines whether or not the voice alarm should be erased from the memory
after it is issued.
Selector 6: Recording quality level (For those models equipped with a built-in TAD)
This selector determines the recording quality level (this function can be accessed also by
the user function 8-8). If it is set to "0" (High), the sampling rate by selector 7 of WSW27
takes effect; if it is set to "1" (Normal), the sampling rate specified by selector 4 of WSW30
takes effect.
Selector 7: Sampling rate when the recording quality level is set to Normal (For those models
equipped with a built-in TAD)
This selector determines the sampling rate when selector 6 of WSW27 is set to "1" (High). If
this selector is set to "0", the sampling rate is 9.6 kbps; if it is set to "1", the sampling rate is
8.8 kbps.
WSW27
(Function setting 5)
Function
V – 57
Setting and Specifications
0: YES 1: NO
0: NO 1: YES
0: NO 1: YES
0: YES 1: NO
0: High 1: Normal
0: Short 1: Long