How To Use The Receptacles - Honda EB11000 Owner's Manual

HOW TO USE THE RECEPTACLES
When. two or more receptacles are used, refer to the table below and
apply the load to each receptacle equally to prevent overloading.
Voltage fluctuation can be prevented by applying the load equally to
the single phase receptacles.
Receptacle
240 'J 120v
Case
50 A 30 A 50 A
30 A 20 A Max.
for both
Using 240 V only 39.6 A Max. 30 A Max.
39.6 A Total
Using 120 V only
50 A Max. 30 A Max.
20 A Max.
at one
Using both 120 V 1
Total 10 A
Total 79.2 A
Total 59.2 A
and 240 V
Total 20 A
Total 39.2 A
Total 30 A
Total 19.2 A
When both 240 V and 120 V receptacles are used, be sure that the
ampere draw at each receptacle is less than the specified capacity and
the total amperage is less than 79.2 A
22
12OVli4OV 5bA
12OVIi4OV 30A