Pre-Operation Check; Engine Oil - Honda EB11000 Owner's Manual

PRE-OPERATION CHECK
ENGINE OIL
l
Engine oil is a major factor affecting engine performance and
service life. Nondetergent oils and 2-stroke engine oils are not
recommended because they have inadequate lubricating charac-
teristics.
l
Check the oil level BEFORE EACH USE with the engine on a
level surface and the engine stopped.
Use 4-stroke motor oil that meets or
exceeds the requirements for API ser-
vice classification SF or SG. Always
check the API SERVICE label on the oil
container to be sure it includes the
letters SF or SG.
L I 1 1 1 1 I I
.30 -20 -10 0 10 20 30 40x
AMBIENT TEMPERATURE
SAE low-30 is recommended for general use. Other viscosities
shown in the chart may be used when the average temperature in
your area is within the indicated range.
Other viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.
1. Place the engine on a level surface.
2. Remove the dipstick and wipe it clean.
3. Fully insert the dipstick, then remove it to check the oil level.
4.
5.
If the oil level is near or below the lower limit mark on the dipstick,
remove the oil filler cap, and fill with the recommended oil to the
upper limit mark.
Reinstall the dipstick and filler
UPPER LIMIT
LOWER LIMI'
25