Honda Ridgeline Owner's Manual page 91

2007
Hide thumbs Also See for Ridgeline:
Table of Contents

Advertisement

4.
Push and hold the front of the
master door lock switch on the
driver' s door. You will hear a
clicking sound, and after about 5
seconds, you will hear another
clicking sound.
5.
Release the switch, and turn the
ignition switch to the ACCESSORY
position within 5 seconds.
(I)
To program the Drive Lock mode:
Locks all doors when the vehicle's speed
reaches about 9 mph (15 km/h).
Make sure the shift lever is in the
1.
Park (P) position.
Apply the parking brake, and close
2.
the driver's door.
Turn the ignition switch to the ON
3.
(II) position (do not start the
engine).
Door Locks
Push and hold the brake pedal,
4.
then move the shift lever out of
Park (P).
Push and hold the front of the
5.
master door lock switch on the
driver' s door. You will hear a
clicking sound, and after about 5
seconds, you will hear another
clicking sound.
Release the switch, and turn the
6.
ignition switch to the
ACCESSORY
position within 5 seconds.
(I)
7. Move the shift lever to PARK (P).
CONTINUED
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ridgeline 2007

Table of Contents